A new car can change what you expect from driving. But the real test of ownership often comes when something unexpected happens.

If an AION is involved in an accident, repairing the visible damage is only part of the job. The vehicle’s structure, high-voltage system, diagnostics, cameras and sensors may all need to be assessed before it can be safely returned to the road.

That is why manufacturer approval matters.

Finesse Bracknell is an AION-approved accident repair centre, providing AION owners in Bracknell, Slough, Windsor, Maidenhead, Wokingham, Reading and the wider Thames Valley with access to manufacturer-approved accident repair close to home.

AION vehicles are becoming a more familiar sight on UK roads. Backed by GAC Group, the brand has entered the UK market with a clear focus on electric technology, safety and long-term ownership support.

The AION V was the first model introduced to UK drivers. Its high-strength body structure, battery safety systems and driver-assistance technology work together as one vehicle. Following an accident, those systems cannot be considered separately from the bodywork around them.

Finesse’s relationship with the brand began at the AION Immersion Day, where our team gained a closer understanding of its vehicles, technology and plans for the UK. Achieving AION approval at Bracknell builds on that knowledge, ensuring the correct repair support is available when an AION owner needs it most.

Modern electric vehicles carry much of their complexity beneath the surface.

A relatively small area of visible damage may sit close to high-voltage cabling, battery protection zones or a sensor used by an advanced driver-assistance system. Before physical work begins, technicians need to understand what has been affected and which manufacturer procedure applies.

This is why an AION accident repair may begin with diagnostic scanning, high-voltage safety checks and structural measurement rather than immediately removing or repairing a damaged panel.

The same attention is required at the end of the repair. If a bumper, camera, suspension component or sensor position has been affected, calibration may be required. A post-repair diagnostic scan then helps confirm that the relevant vehicle systems have been restored correctly.

You can learn more about the specialist steps involved in electric vehicle accident repair.

No two accidents create exactly the same damage, but every repair needs a clear and controlled process.

1. Assessment

We inspect the visible damage, check the areas behind it and complete the appropriate diagnostic and high-voltage safety checks.

2. Repair planning and authorisation

The team identifies the correct AION repair method, prepares the estimate and communicates with the insurer where the repair is part of a claim. Required genuine parts are identified and ordered.

3. Manufacturer-approved repair

Structural, body, panel and paintwork repairs are completed using the applicable AION procedures, parts, materials and equipment.

4. Diagnostics, calibration and quality control

Following the physical repair, the vehicle receives the required system checks. ADAS calibration is carried out where necessary, followed by post-repair diagnostics and final quality-control checks.

5. Handover

Before collection, we explain the completed work and provide the relevant repair documentation. Throughout the process, our team keeps you informed so you understand what is happening and what comes next.

After an accident, an insurer may recommend a bodyshop from its own repair network. That repairer may not hold AION manufacturer approval.

You can ask for your vehicle to be repaired by Finesse Bracknell, although it is sensible to check your insurance policy for any conditions or additional excess that may apply when selecting your preferred repairer.

Our team can help manage insurer communication and repair authorisation as part of the process. Choosing an AION-approved repairer means the repair is completed using AION procedures and genuine parts, supporting the vehicle’s safety, integrity and warranty position, subject to AION’s warranty terms.

If you need immediate support following an accident, AION Accident Assistance is available 24 hours a day, regardless of who you are insured with or who was at fault.

Finesse Bracknell is located at Unit 2–3 The Sterling Centre, Bracknell, RG12 2PW, within easy reach of AION’s UK home in Slough.

Our Bracknell team supports AION owners from Slough, Windsor, Maidenhead, Ascot, Wokingham, Reading, Camberley, Farnborough and surrounding areas across Berkshire and the Thames Valley.

For local drivers, that means access to an approved AION bodyshop without sending the vehicle far from home, and a team that can support the journey from the first assessment through to collection.

Q: Is Finesse Bracknell officially approved by AION?

A: Yes. Finesse Bracknell holds formal AION manufacturer approval for accident repair. This means the centre meets AION’s requirements and follows the manufacturer’s repair procedures.

Q: Can Finesse Bracknell repair an AION V

A: Yes. Finesse Bracknell can complete manufacturer-approved accident repairs to the AION V, including structural and bodywork repair, paint refinishing, EV safety procedures, diagnostic scanning and ADAS calibration where required.

Q: Why should I choose an AION-approved bodyshop?

A: An approved bodyshop has access to AION repair procedures and uses appropriately trained technicians, genuine parts, approved materials and the specialist equipment required for the vehicle. This helps ensure the repair addresses more than the damage visible from the outside.

Q: Can I choose Finesse if my insurer recommends another bodyshop?

A: You can request Finesse Bracknell as your preferred repairer. Before confirming your choice, check your policy for any conditions or additional excess that may apply. Our team can then assist with insurer communication and repair authorisation.

Q: Will my AION need ADAS calibration after an accident?

A: It depends on the damage and the components affected. Calibration may be required if the repair changes the position of a camera, radar, sensor, bumper, windscreen or suspension component. Finesse Bracknell follows the relevant manufacturer procedure and calibrates affected systems where required.

Q: How do I arrange an AION repair assessment?

A: Complete our online repair enquiry form and select Bracknell as your preferred centre. Our team will review the information and contact you about the next stage of the assessment.

An accident interrupts more than a journey. Our role is to make what follows clearer. From the first assessment and insurer communication to the repair, final checks and handover, Finesse Bracknell provides AION owners with one approved route through the process.

BOOK YOUR AION REPAIR ASSESSMENT